Repairing Compound BC 68

BC68 is used for repairing minor damages on concrete surface and views of building. The product also increases longevity and durability of concrete structures and is very cost effective

محاسبه آنلاین میزان مصرف محصول

حجم بتن ریزی به متر مکعب

عیار بتن

میانگین میزان مصرف بر اساس بروشور فنی(درصد مصرف)

مقدار خرید بر اساس کیلوگرم برابر است با :

مقدار خرید بر اساس تن برابر است با :

Description

Field of Application

BC68 is used for renewing and repairing damages, cracks, ruggedness, breaks and flaws on surface. Specific uses for this product are:
Repairing stairs, views of building and all pre-cast and cast in place concrete structures,
(Repairing water reservoirs made of concrete (compatible with water,
Repairing cement places, mosaics and units,
Repairing and flattening sub-floors prior to placing new cover
Flattening effects of wooden moulds,
Repairing wormy and spongy concrete surfaces,

Properties and Effects

 Easy to mix with water and prepare a workable and even paste,
Sufficiently adhesive to cement bases,
No shrinkage or cracks,
Increasing tensile resistance during repair operation,
Increasing durability of concrete in thawing-freezing cycles.
Its thermal expansion is equal to concrete’s,
BC68 and concrete are very similar in color,
Ease of use.

Dosage

Depending on the quantity of pore and ruggedness of the target surface, use approximately 1.5 Kg of BC68 per square meter with 1 mm thickness

Instruction for use

a) Base preparation:
The base surface should be completely clean and free from dirt. To prepare base, use BC72. To increase the concrete bond strength to cement structures, moisten and roughen the base surface
b) Application
The powder shall be mixed with water at the rate of 30 to 40% by weight of BC68 and mix well to obtain a uniform pasty mixture. The prepared paste must be allowed to elapse for 15 minutes before use. To make a better mix use Beton Chimie mixer. The mortar can be applied in 5 mm thickness for each layer. To increase the thickness of layers apply the mixture in phases. Thickness of up to 20 mm is allowed. Use the mortar within 30 minutes

Reference Standards

ASTM C 928

This post is also available in: Persian