Concrete Waterproof (Powder) BC 40

Calculate product consumption

حجم بتن ریزی به متر مکعب

عیار بتن

میانگین میزان مصرف بر اساس بروشور فنی(درصد مصرف)

مقدار خرید بر اساس کیلوگرم برابر است با :

مقدار خرید بر اساس تن برابر است با :


BC40 reduces leakage of water into hardened concrete. The product also increases resistance of concrete to frost and corrosive chemicals. Due to its micronized ingredients and being water repellent, it is the best waterproof filter for filling microscopic porous surfaces among concrete elements.

Producing impermeable concretes to water and chemical solutions,
Producing resistant and durable concretes for low temperatures and freezing conditions,
Sealing the concrete in hydraulic structures,
Producing durable concretes for concreting the water resources and reservoirs, retaining walls, water channels, tunnels, bridges, dams, pools, basins and other concrete surfaces.

Reducing permeability and percolation of concrete to water and corrosive chemical solutions,
Increasing the integrity and uniformity of concrete,
Reducing the effects of concrete bleeding and cracking,
Increasing the concrete durability and protecting the bars,
Reducing the carbonation rate,
Preventing algae grows on the concrete surface.

Depending on the conditions and consumption cases, in the case of concrete built by using stone and waste materials, use BC40 Up to 2% of cement weight.

Because the product is insoluble in water, mixing BC40 with dry ingredients of concrete achieves the best result. Therefore, add BC40 to the dry ingredients of concrete and mix them for 5 minutes. Then add water and other ingredients and continue mix operation.

Color: White
Physical state: Powder
Density: 1.08 g/cm3
PH: Approx. 7
Solubility: Insoluble in water
Chloride: Nill

Storage: in original package protected against air,
Shelf life: 1 year in original package,
Packaging: 25 kg containers.

The overuse of the product delays the concrete setting,
In high hydrostatic pressure conditions, use BC40 with superplasticizer and water reducing additives. In certain cases, use BC19 or BC17.

 Microscopic porosity in aggregate that results from lack of small materials fill them and developing hairy conduits in concrete through water evaporation are the main reasons for the concrete becomes permeable. Therefore, the most effective scientific and practical method for building an impermeable concrete is using BC40 as a micronized waterproof material to fill microscopic porosities. The product can also be used with a superplasticizer to reduce the ratio of water to cement,
If there is a need for a high impermeable BC40, use Micro Silica Gel,
When simultaneous use of BC40 with other additives is required, consult Research Center of Beton Chimie

ASTM C 898

بدون دیدگاه

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *