Repairing and renewing where short setting time needed,Concreting in cold weather condition, preventing from concrete freezingConcrete pumping with least depreciationAchieving maximum performance in highly flat structures and concrete structures with small area,Performing precast, foundations, ceilings, partitions, roads and landing fields surfaces, and different kinds of repairs,Concreting with slide casts,Producing concrete with higher strength using less water content in constant workability,Minimizing segregation in high slump and workable concrete mixes,Significant labor savings in placement of concrete,Accelerating setting time of concrete.

Improving workability and flowability with no strength reduction,
Achieving high initial strength, and short setting time,
Reducing water content in constant flowability at least 12% to achieve to higher compressive strength concrete and increase density leading to reduction of permeability against water and corrosive chemicals,
Reducing shrinkage, bleeding, and crack formation,
Reducing cast opening and loading time,
Superior finishing characteristics for surface,
Compatible with all kinds of Portland cement.

The exact dosage rate should be determined according to workability, flowability, strength, weather temperature and mix design of parameters. The dosage could be 0.5 to 1.5 percent by weight of cement. The exact dosage rate may be obtained by trial mixes.

BC18 can be added to the concrete mix at the job site. It is recommended that with adding the last batch water; introduce the accelerating superplasticizer into the concrete. The concrete containing this admixture should be mixed for 2 minutes prior to discharge.

Color : Green
Physical state: Liquid
Density: 1.1 g/cm3
PH: Approx. 10
Solubility: In water
Chloride: Nill