Epoxy Base Coating BC55
حجم بتن ریزی به متر مکعب
میانگین میزان مصرف بر اساس بروشور فنی(درصد مصرف)
مقدار خرید بر اساس کیلوگرم برابر است با :
مقدار خرید بر اساس تن برابر است با :
BC55 as a highly resistant coating is used for painting surfaces and protecting them against a wide range of solvents and chemicals.
Resistant coating on all types of concrete, cement, metal, and wooden … surfaces.
Painting surfaces exposed to high temperatures,
Painting and coating surfaces exposed to abrasion,
Resistant coating in corrosive chemical, alkaline and humid ambient,
Isolation of toilets.
Temperature fluctuations resistant,
Resistant and impermeable to water, moisture and chemicals,
Highly resistant to abrasion,
Having a low thermal expansion coefficient,
Having a low thermal contraction without any shrinkage risk,
No crack because of minor surface deformations and coats hairy cracks,
No harmful side effects on water.
Depending on the base surface condition, one kg of BC55 will cover three to four square meters.
a) Base preparation
The base surface should be completely dry, clean and free from oil and dirt,
In the case of newly concreted surfaces, the repair operation or coating with BC52 should be made at least 28 days after concreting,
Old concrete surfaces first should be cleaned and prepared through mechanical methods,
Small surfaces first should be prepared through chemical methods and then washed.
b) Surface preparation
All surfaces should be prepared by Bc52.
To reduce costs and the consumption of BC55, porous surfaces need to be prepared in two phases.
Highly porous surfaces must be prepared by other methods. In such cases, consult the Research Center of Beton Chimie,
If primer is used, allow the solvent to evaporate completely, and then apply the coat.
To make a better mix, use Beton Chimie mixer,
Add components in hardener container to BC55 and properly stir up for 2 to 3 minutes.
BC55 can be applied on surfaces using pistols, brushes or paint rollers.
Note: to maintain equipment and tools, clean them with solvents immediately after use and prior to the paint dries on tools.
Color: White, gray and
colorless, available in other colors upon request.
Solubility: In epoxy solvent
Density: 1.35 g/cm3
PH: Approx. 7
- Storage: In capped container protected against air and freezing temperature.
Shelf life: 6 months in original package,
Packaging: 4 and 16 Kg containers.
Use BC53 (epoxy solvent) to clean your hands and tools,
To coat concrete surfaces with BC55, first use BC52 to prepare bases.